GIZUMO Gourmet JapanFOOD CULTURE · ENGLISH

Matcha, Sencha and Hojicha: Choose the Tea, Then the Method

Understand the processing differences behind three Japanese teas and compare clearly attributed brewing examples without treating one method as universal.

Start with what is in the packet

Before choosing a Japanese tea by the color of its cup or packaging, check what kind of tea it is and how it is meant to be prepared. Matcha, sencha and hojicha offer three useful starting points. Their differences become much easier to understand when the preparation is part of the choice.

Three processing paths

MAFF’s Uji tea guide explains that matcha comes from tencha, made with shade-grown leaves that are steamed and dried without rolling. After stems and veins are removed, the leaves are milled into powder. Sencha follows a different process: its leaves are steamed, rolled and dried. Hojicha is tea that has been roasted. These are production distinctions, so a single description such as Japanese green tea leaves out information that matters when you reach for the kettle.

Sources: T1

Matcha: whisk a measured bowl

For its usucha, or classic matcha, Ippodo gives an example using 2 grams of sifted powder and 60 milliliters of water at 80°C, followed by 15 seconds of whisking. The preparation takes place directly in the bowl. There is no separate stage of pouring an infusion away from loose leaves. Those quantities describe the producer’s own method and provide a concrete reference for understanding what a small bowl of plain matcha involves.

Sources: T2

If you are buying matcha to prepare at home, ask which method the seller recommends for that product. Check whether you want a plain bowl or a drink with milk before choosing a recipe. Keep the tea, water and added ingredients clear in your notes so a second attempt is a meaningful comparison.

Sencha: steep, then separate the tea

Ippodo’s standard sencha method uses 10 grams of leaves with 210 milliliters of water at 80°C. The leaves steep for 60 seconds without stirring, and the tea is then poured out completely. This is a different routine from whisking powder into a bowl. The producer describes this particular method as making a concentrated cup, so its quantities should be read together rather than borrowing the water temperature while silently changing all the other proportions.

Sources: T3

Hojicha: a hotter, shorter example

For its standard loose-leaf hojicha method, Ippodo uses the same 10-gram weight of tea with 240 milliliters of water at 100°C and a 30-second infusion. The tea is again poured out completely. Comparing that method with its sencha instructions shows why one kettle setting and one timer cannot represent every Japanese tea. These are producer examples, not rules that override the directions supplied with another tea or a different product format.

Sources: T4

Make a comparison you can repeat

For a useful tasting, begin with the package directions and change one variable at a time on later attempts. Note the tea name, leaf or powder weight, water quantity, temperature and time. At a café, ask whether the drink is plain, sweetened or made with milk before ordering. If you like it, ask for the exact tea name. A record of what you drank and how it was prepared is more useful for finding it again than a color description alone.

Sources